£93.00 £77.50
Product in stock
Next day shipping available & this product ships globally

Standard items are shipped same day from stock (Mon-Fri) if ordered before 12pm. Scenic Supplies Plus will advise lead time on rare exceptions or non-standard items.

Your transaction is secure
Stripe Payments / SSL

Rosco Flamex PC - Paper

In stock
Code
150079pc0128

Configure now

Roscoflamex PC was formulated specifically to treat the many paper products commonly used in props and scenery construction. Most paper products without a wax coating, polyurethane, or other similar water-resistant properties can be effectively treated.
Using Roscoflamex PC
Roscoflamex PC has been premixed and does not require any further dilution. The method of application and the amount of Roscoflamex PC required for sufficient treatment varies with the materials in use. Some discoloration and wrinkling of paper products may occur as the paper materials dry. Multiple light treatments will minimize this.

Coverage

One gallon of Roscoflamex PC will treat approximately 400 square feet (37 square meters) of 90lb paper. Usage will vary with weight and thickness of material.

Applying Roscoflamex PC

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibres of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.
Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Storage

Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.

Disclaimer

Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.

Roscoflamex PC is a new formulation designed to effectively treat paper and cardboard products used in props and scenery. Do not intermix old and new Flamex products. Use to treat:
Letters
Copier paper
Newspapers and magazines
Paper trash and packaging
Matte board, cardstock

View the material compatibility chart for more specific materials.


DO NOT COMBINE OLD FLAMEX PRODUCTS WITH NEW FLAMEX PRODUCTS
Refer to Product Datasheets and technical specifications for full product details,
application methods, coverage and cautions.



 GobosProjectorsHoldersFilter

UK

     
MethodDelivery Time    
Royal Mail Signed forUp to 5 days£4.50 £4.50 
UPS Next Day1 working day£7.20£15.00£7.20£7.20
UPS Next Day - AM service1 working day - before 12pm£15.00 £15.00 
UPS SaturdayGuaranteed Saturday£49.00 £49.00 
Same Day - Motorbike (London only)Same day£42.00 £42.00 
      

Mainland Europe & Ireland

     
MethodDelivery Time    
Royal Mail - International Signed ForAllow up to 10 daysFrom £15.00   
UPSUp to 5 days£14.50£35.00From £22.50 
      

USA & Rest of the World

     
MethodDelivery Time    
Royal Mail - International Signed ForAllow up to 15 daysFrom £15.00 From £15.00 
UPSUp to 5 daysFrom £29.00£35.00From £29.00£67.50